NSN 5306-01-217-0657 · NIIN 012170657 · FSC 5306
NO DASHES 5306012170657
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.265 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.783 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.377 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.470 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.070 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 720000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.406 AND INCHES MAXIMUM 0.416 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | WITH 0.134 IN MIN,0.144 IN. MAX DIA BY 0.058 IN. MIN,0.078 IN. MAX LG UNDERCUT BETWEEN SHOULDER AND THREADS; DRY FILM LUBE PER MIL-L-46010 ON GRIP ONLY |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6485 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |