NSN 3130-00-146-2938 · NIIN 001462938 · FSC 3130
NO DASHES 3130001462938
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BEARING SURFACE ASSN STD SINGLE MATERIAL RESPONSE SAE |
| STYL | STYLE DESIGNATOR | |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE AND OIL |
| MATT | MATERIAL | BEARING SURFACE STEEL COMP E52100 |
| MATT | MATERIAL | HOUSING STEEL |
| MATT | MATERIAL | SEAL STEEL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 2.7500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 9.7500 |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 4.9375 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.7500 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.6875 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 4.3307 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 2.0000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 13.5625 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 7.0000 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | INCHES NOMINAL 6.5000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 7.0000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 16.5000 |