NSN 5320-00-069-0781 · NIIN 000690781 · FSC 5320
NO DASHES 5320000690781
In Stock
RIVET,BLIND
Rivets
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.478 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.113 |
| MATT | MATERIAL | BOLT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 1,CL 3 AND FED SPEC 2ND TREATMENT RESPONSE QQ--35 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1669 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 OR ASSN STD 1ST MATERIAL RESPONSE A-S 5639 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5641 OR ASSN STD 3RD MATERIAL RESPONSE AST- A582 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.197 AND INCHES MAXIMUM 0.199 |
| AAZF | SHANK STYLE | |
| ABAF | EXPANSION DEVICE | THREADED MANDREL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| CQFM | HARDNESS RATING | NUT ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| SFTT | SURFACE TREATMENT | BOLT CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | NUT CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | SLEEVE CADMIUM AND PASSIVATE |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.312 |
| CQFM | HARDNESS RATING | BOLT ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BOLT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| MATT | MATERIAL | NUT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MATT | MATERIAL | SLEEVE STEEL COMP 304 OR STEEL COMP 303F OR STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.406 |
Supersedes
This item replaces cancelled NIINs 000015166 · 000571668 · 001430439. An older drawing citing one of those numbers resolves here.