NSN 5905-00-622-1527 · NIIN 006221527 · FSC 5905
NO DASHES 5905006221527
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ARNH | OPERATING POSITION | SWITCH END OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.220 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.000 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -2.0 TO 2.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.437 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.046 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.487 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-914105 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 8 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.036 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL AND SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.0 AND KILOHMS 2ND SECTION 45.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 305.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.469 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.000 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.000 |
| AEDX | SHAFT STYLE | |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 160.00 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -100.0 TO 100.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | DC 4.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |