NSN 5990-00-583-9594 · NIIN 005839594 · FSC 5990
NO DASHES 5990005839594
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 79.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 3.0 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 68.50 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7620 AND INCHES MAXIMUM 1.7660 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6870 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2810 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4610 AND INCHES MAXIMUM 0.4750 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 73.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 110.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 14.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 17.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 145.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 25.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 380.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |