NSN 6105-00-828-6994 · NIIN 008286994 · FSC 6105
NO DASHES 6105008286994
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTN | SPECIFIC USE | EVAPORATOR |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| AAJT | OVERALL HEIGHT | INCHES 3.281 |
| AAJU | OVERALL LENGTH | INCHES 3.625 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.4370 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| AAJV | OVERALL WIDTH | INCHES 3.281 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.500 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 2 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0166 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.281 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.844 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1650.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FEAT | SPECIAL FEATURES | IMPEDANCE PROTECTED; 1/4-20 HEX NUT INCLUDED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| FAAZ | PHASE | INPUT SINGLE |
| AKPS | DUTY CYCLE | CONTINUOUS |
Supersedes
This item replaces cancelled NIIN 012199383. An older drawing citing one of those numbers resolves here.