NSN 4720-00-870-5123 · NIIN 008705123 · FSC 4720
NO DASHES 4720008705123
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.625 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 119.0 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.359 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UN |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| CRFY | FLOW ANGLE | SECOND END DEGREES 82.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 81.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.125 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 11.265 |