NSN 6105-00-801-6332 · NIIN 008016332 · FSC 6105
NO DASHES 6105008016332
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJV | OVERALL WIDTH | INCHES 1.062 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 57.5 AND AC 115.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.053 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 2175.0 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| CWDY | TEMP RATING | AMBIENT CELSIUS 65.0 AND OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 165.0 |
| ABSA | SPLINE QUANTITY | 13 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AAJU | OVERALL LENGTH | INCHES 2.753 |
| FAAZ | PHASE | INPUT TWO |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.6 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.3700 |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.1083 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.370 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.053 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| ACDC | CURRENT TYPE | INPUT AC |
| AAJT | OVERALL HEIGHT | INCHES 1.062 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.812 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 6000.0 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1247 |
Supersedes
This item replaces cancelled NIINs 006283234 · 008003200. An older drawing citing one of those numbers resolves here.