NSN 4720-00-882-6619 · NIIN 008826619 · FSC 4720
NO DASHES 4720008826619
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.312 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.375 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.750 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.109 |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 3500.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 46.750 |
| CTCJ | FLANGE STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.500 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.750 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-H-25579 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.312 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2500.0 |