NSN 4720-00-901-2796 · NIIN 009012796 · FSC 4720
NO DASHES 4720009012796
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER MOLDED POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| AAJD | THREAD CLASS | 3B |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.438 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.688 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.750 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 21.000 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER MOLDED POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE STEEL CORROSION RESISTING |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL CORROSION RESISTING |
| AKXL | END FITTING COMPONENT AND MATERIAL | THIRD END SOCKET STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE PASSIVATE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | THIRD END SOCKET CADMIUM |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY LAID STEEL WIRE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
Supersedes
This item replaces cancelled NIINs 007388314 · 007977749 · 007977752. An older drawing citing one of those numbers resolves here.