NSN 5910-01-364-2819 · NIIN 013642819 · FSC 5910
NO DASHES 5910013642819
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | MILLIMETERS MINIMUM 1.250 |
| ADAQ | BODY LENGTH | MILLIMETERS NOMINAL 0.150 |
| ADAT | BODY WIDTH | MILLIMETERS NOMINAL 0.150 |
| ADAU | BODY HEIGHT | MILLIMETERS NOMINAL 0.150 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.100 |
| AEBT | TERMINAL DIAMETER | MILLIMETERS NOMINAL 0.016 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 8.200 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 100.0 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -60.0 TO 60.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PICOFARADS SINGLE SECTION -0.50 TO 0.50 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 87990-755002A7705 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |