NSN 3120-00-512-5165 · NIIN 005125165 · FSC 3120
NO DASHES 3120005125165
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 60.0 AND ROCKWELL C MAXIMUM 63.0 |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7180 |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | INCHES MINIMUM 0.3020 AND INCHES MAXIMUM 0.3220 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9380 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.4590 AND INCHES MAXIMUM 1.4790 |
| AGGH | OUTER MEMBER WIDTH | INCHES MAXIMUM 0.4330 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2515 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9377 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | INNER MEMBER NICKEL AND CHROMIUM |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | LUBRICATION GREASE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LUBRICATION MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INTERNAL ROD END BODY STEEL COMP 410 |
| CQFM | HARDNESS RATING | OUTSIDE DIAMETER SURFACE OF BODY ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP E52100 |