NSN 4820-00-601-0972 · NIIN 006010972 · FSC 4820
NO DASHES 4820006010972
In Stock
VALVE,ANGLE
Valves, Nonpowered
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARKN | FLANGE SHAPE | SECOND END ROUND WITH HOLES |
| AWLS | CONNECTION TYPE | FIRST END FLANGE |
| AWLS | CONNECTION TYPE | SECOND END FLANGE |
| CWCD | NOMINAL OUTSIDE DIAMETER | FIRST END INCHES 6.125 |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | SECOND END INCHES 4.500 |
| CWDF | FLANGE FACE DESIGN | FIRST END RAISED STRAIGHT |
| CWDF | FLANGE FACE DESIGN | SECOND END PLAIN |
| CWDH | RAISED FACE NOMINAL HEIGHT | FIRST END INCHES 0.250 |
| CWDL | RAISED FACE NOMINAL DIAMETER | FIRST END INCHES 3.625 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 600.0 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AQLR | VALVE OPERATION METHOD | MANUAL |
| ADQU | FLOW CONTROL DEVICE | DISK |
| ADSR | BONNET TYPE | OUTSIDE SCREW-YOKE |
| CWCD | NOMINAL OUTSIDE DIAMETER | SECOND END INCHES 6.125 |
| CWCK | NOMINAL THICKNESS | FIRST END INCHES 0.875 |
| CWCK | NOMINAL THICKNESS | SECOND END INCHES 0.875 |
| CWCL | FIRST CONNECTION FACE TO CENTERLINE DISTANCE | INCHES 4.500 |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | FIRST END INCHES 0.812 |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | SECOND END INCHES 0.812 |
| CWCR | SECOND CONNECTION FACE TO CENTERLINE DISTANCE | INCHES 4.500 |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | FIRST END INCHES 4.500 |
| STYL | STYLE DESIGNATOR | |
| ARKN | FLANGE SHAPE | FIRST END ROUND WITH HOLES |
| MATT | MATERIAL | BODY NICKEL ALLOY |
| MATT | MATERIAL | FLOW CONTROL DEVICE STEEL CORROSION RESISTING |
| MATT | MATERIAL | SEAT NICKEL ALLOY |
| MATT | MATERIAL | STEM NICKEL ALLOY |
| ADST | BONNET ATTACHMENT METHOD | BOLTED |
Supersedes
This item replaces cancelled NIIN 002874593. An older drawing citing one of those numbers resolves here.