NSN 5975-01-718-1573 · NIIN 017181573 · FSC 5975
NO DASHES 5975017181573
In Stock
CONDUIT ASSEMBLY,NONMETALLIC,ELE
Electrical Hardware and Supplies
Application: F-15 LIRST SE
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | F-15 LIRST SE |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.470 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNEF |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 1.75 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MAXIMUM 0.84 |
| FEAT | SPECIAL FEATURES | SHIELDING BRAID: TIN/COPPER PER QQ-B-575; END COUPLING: END COUPLINGS -ALUMINUM ALLOY -2011-T3, 2024-T351 OR 6061-T6; GROUND WIRE: M22759/11-20-9 IN ACCORDANCE WITH MIL-W-22759/11 OR EQUAL; THREAD PER INCH: END A = 18.0, END B = 20.0; GROUNDING WIRE TO GROSS SHIELD: END A ONLY; COUPLING END DIAMETER MAX: END A= 1.520 INCH, END B = 1.030 INCH |
| FLEX | FLEXIBILITY | FLEXIBLE |
| MATT | MATERIAL | BODY PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | COMPLETE END FITTING FED SPEC 1ST MATERIAL RESPONSE QQ-A-225 TO 3D AND FED SPEC 2ND MATERIAL RESPONSE QQ-A-225 TO 6E AND FED SPEC 3RD MATERIAL RESPONSE QQ-A-225 TO BE AND NATIONAL STD 4TH MATERIAL RESPONSE A-S-QQ-A-225 TO 3 AND NATIONAL STD 5TH MATERIAL RESPONSE A-S-QQ-A-225 TO 6 AND NATIONAL STD 6TH MATERIAL RESPONSE A-S-QQ-A-225 TO 8 AND ASSN STD 7TH MATERIAL RESPONSE AST-8211 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER COVERING MIL SPEC 1ST MATERIAL RESPONSE -IL-R-6855E OR NATIONAL STD 2ND MATERIAL RESPONSE A-S-R-6855,CLASS 2,TYE B |
| SFTT | SURFACE TREATMENT | COMPLETE END FITTING CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | COMPLETE END FITTING FED SPEC SINGLE TREATMENT RESPONSE QQ--416, TYE II, CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNEF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC 1ST MATERIAL RESPONSE -IL-T-81914 TO 4 OR NATIONAL STD 2ND MATERIAL RESPONSE A-S-T-81914 TO 4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CHAFING SLEEVE FED SPEC 1ST MATERIAL RESPONSE QQ-S-763F OR NATIONAL STD 2ND MATERIAL RESPONSE A-S-QQ-S-763 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.187 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.875 |
| CQTX | TERMINAL END TYPE | BOTH ENDS PLAIN FERRULE W/COUPLING NUT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 18.00 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CONDUIT ASSEMBLY,NON-METALLIC, FLEXIBLE, SINGLE SHIELD |
| ACKE | BRAIDED METALLIC SHIELD TYPE | TINNED COPPER WIRE |
| MATT | MATERIAL | OUTER COVERING RUBBER SYNTHETIC |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| ARPB | ACCOMMODATION TYPE | END GRIPPING BOTH ENDS ROUND KNURLED |
| MATT | MATERIAL | CHAFING SLEEVE STEEL CORROSION RESISTING |
| MATT | MATERIAL | COMPLETE END FITTING ALUMINUM ALLOY 2011 AND ALUMINUM ALLOY 2024 |
| ABHK | TRADE SIZE | 0.500 |