NSN 6105-00-671-7471 · NIIN 006717471 · FSC 6105
NO DASHES 6105006717471
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 12.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 27.0 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 8100.0 AND HIGH FULL LOAD 8600.0 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 71.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.843 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1666 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.190 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.968 |
| AAJT | OVERALL HEIGHT | INCHES 2.374 |
| AAJU | OVERALL LENGTH | INCHES 6.169 |
| AAJV | OVERALL WIDTH | INCHES 2.374 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.1245 |
| BKPB | CURRENT RATING METHOD | LOAD |
| ANPZ | ENCLOSURE FEATURE | EXPLOSION PROOF |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.129 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.308 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES MINIMUM 0.3149 AND INCHES MAXIMUM 0.3151 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 0.5180 |
| AGQL | UNDERCUT LENGTH | SINGLE END INCHES NOMINAL 0.093 |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FACE |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABGH | STEP DIAMETER | SINGLE END INCHES MINIMUM 0.209 AND INCHES MAXIMUM 0.213 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | SINGLE END INCHES MINIMUM 0.209 AND INCHES MAXIMUM 0.2130 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.052 AND INCHES MAXIMUM 0.056 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 2 |