NSN 2920-00-293-5158 · NIIN 002935158 · FSC 2920
NO DASHES 2920002935158
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| APAT | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 28.0 AND MAXIMUM 29.5 |
| AARA | TERMINAL QUANTITY | 3 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.328 |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 37.0 AND MAXIMUM 43.0 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 25.0 AND MAXIMUM 27.0 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.453 |
| ADER | MOUNTING STYLE | |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| APAW | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH | INCHES NOMINAL 5.315 |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED THREADED STUD |
| ANYD | SYSTEM GROUND POLARITY | POSITIVE |
| ANYC | SYSTEM VOLTAGE RATING | 24.0 |
Supersedes
This item replaces cancelled NIIN 006318557. An older drawing citing one of those numbers resolves here.