NSN 3110-00-079-9960 · NIIN 000799960 · FSC 3110
NO DASHES 3110000799960
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3122 AND INCHES MAXIMUM 0.3125 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.4375 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.0630 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | 0.0004 IN. MAX RADIAL CLEARANCE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-RF-81322 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.2400 AND INCHES MAXIMUM 1.2510 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.5630 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.6500 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.8700 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 2.4380 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | SHAFT STEEL |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | OUTER RING STEEL |
Supersedes
This item replaces cancelled NIINs 001735067 · 005165315 · 007027796. An older drawing citing one of those numbers resolves here.