NSN 5905-00-931-3808 · NIIN 009313808 · FSC 5905
NO DASHES 5905009313808
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.672 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.297 |
| AEDX | SHAFT STYLE | |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.203 AND INCHES MAXIMUM 1.423 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.751 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.141 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AAQL | BODY STYLE | |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 12.5 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
Supersedes
This item replaces cancelled NIIN 000150139. An older drawing citing one of those numbers resolves here.