NSN 5905-00-943-6420 · NIIN 009436420 · FSC 5905
NO DASHES 5905009436420
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.410 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 3.205 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 75.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 310.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 50.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 5 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 40.00 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.344 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.211 AND INCHES MAXIMUM 0.221 |
| AEDX | SHAFT STYLE | |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 1 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.422 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.440 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.362 |
Supersedes
This item replaces cancelled NIINs 002842175 · 005023035. An older drawing citing one of those numbers resolves here.