NSN 5905-00-195-4482 · NIIN 001954482 · FSC 5905
NO DASHES 5905001954482
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 20.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 250.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 310.0 AND MAXIMUM 325.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 390.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 6.810 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 160.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 3:00 OCLOCK AND AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 300.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| FEAT | SPECIAL FEATURES | MOUNTING HOLES SPACED 180 DEG ON 1.190 IN. RADIUS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR22-11 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.375 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 2.500 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.410 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 6.090 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 2.344 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.344 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.957 |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.720 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE |