NSN 5905-00-088-2580 · NIIN 000882580 · FSC 5905
NO DASHES 5905000882580
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.60 |
| AEFY | SHAFT END PLAY | INCHES 0.006 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.9370 |
| AAVM | PILOT LENGTH | INCHES MAXIMUM 0.0320 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 200.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-8903 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-8903 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.000 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.505 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.218 |
| AEDX | SHAFT STYLE | |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.937 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.250 |
| AEDA | MOUNTING LIP DEPTH | INCHES MAXIMUM 0.0850 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.218 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0800 |