NSN 6680-00-331-7887 · NIIN 003317887 · FSC 6680
NO DASHES 6680003317887
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS KNURLED SURFACE |
| AASA | THREAD LENGTH | FIRST END INCHES NOMINAL 0.2475 |
| AASA | THREAD LENGTH | SECOND END INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 29.094 AND INCHES MAXIMUM 29.531 |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 1.000 |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| SCSZ | CROSS SECTION SIZE | DIAMETER SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.107 |
| SFTT | SURFACE TREATMENT | CASING ZINC |
| ZZZV | FSC APPLICATION DATA | 1/TACHOMETER GROUP,ASPHALT KETTLE |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.445 |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 0.800 |
| CBBL | FEATURES PROVIDED | BOTH ENDS SWIVEL END |
| CFRM | TORSIONAL DEFLECTION RATING | 18 DEG FT LB IN. |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.750 |
| CFRZ | CORE OVERALL LENGTH | INCHES MINIMUM 29.094 AND INCHES MAXIMUM 29.531 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| MATT | MATERIAL | CASING STEEL |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES MINIMUM 27.875 AND INCHES MAXIMUM 28.125 |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| ANQR | PROTECTIVE COATING METHOD | CASING COATED |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| AEDN | TIP LENGTH | SECOND END INCHES MAXIMUM 1.125 |
| AGGZ | SHANK OUTSIDE DIAMETER | FIRST END INCHES MINIMUM 0.498 AND INCHES MAXIMUM 0.503 |
| AGGZ | SHANK OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 0.500 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 0.625 |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 0.750 |
Supersedes
This item replaces cancelled NIIN 006253602. An older drawing citing one of those numbers resolves here.