NSN 3110-00-935-5792 · NIIN 009355792 · FSC 3110
NO DASHES 3110009355792
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZC | LOAD DIRECTION | RADIAL |
| AGYK | SHIELD QUANTITY | 2 |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | SHIELD STEEL CORROSION RESISTING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.6870 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0420 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.2260 |
| AGZD | BORE SHAPE | STRAIGHT |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.2500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| LBMA | LUBRICATION MATERIAL | OIL |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| FEAT | SPECIAL FEATURES | BORE CORNERS CHAMFERED 0.010 IN. BY 45.0 DEG; REMOVABLE SHIELDS |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0006 |
| CTLH | OUTER RING TAPER | PER FOOT IN INCHES NOMINAL 0.0680 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 002770613. An older drawing citing one of those numbers resolves here.