NSN 5905-00-728-4286 · NIIN 007284286 · FSC 5905
NO DASHES 5905007284286
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.025 AND INCHES MAXIMUM 1.075 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AAPN | SECTION QUANTITY | 1 |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.000 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.610 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.8 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208-2 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.190 |
| AEDX | SHAFT STYLE | |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.721 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.335 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.135 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.335 |