NSN 5905-00-761-5409 · NIIN 007615409 · FSC 5905
NO DASHES 5905007615409
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.300 AND INCHES MAXIMUM 1.340 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.910 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208 |
| AAPN | SECTION QUANTITY | 1 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-27208 TO 8 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.330 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.769 AND INCHES MAXIMUM 0.861 |
| AAQL | BODY STYLE |