NSN 5905-00-542-7802 · NIIN 005427802 · FSC 5905
NO DASHES 5905005427802
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.906 AND INCHES MAXIMUM 1.000 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.469 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.274 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.922 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 251.0 AND MAXIMUM 318.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 4 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
Supersedes
This item replaces cancelled NIINs 000219170 · 000877817 · 002708021 · 006815601 · 006824140 · 010559200. An older drawing citing one of those numbers resolves here.