NSN 5905-00-133-0504 · NIIN 001330504 · FSC 5905
NO DASHES 5905001330504
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-23285 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-23285 TO 3 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.453 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.500 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 292.0 AND MAXIMUM 298.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.500 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 48.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.250 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.312 |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.234 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
Supersedes
This item replaces cancelled NIIN 009262866. An older drawing citing one of those numbers resolves here.