NSN 5905-00-644-8980 · NIIN 006448980 · FSC 5905
NO DASHES 5905006448980
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 80.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.781 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.875 |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.250 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 3.844 AND INCHES MAXIMUM 3.906 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.375 |
| AAQL | BODY STYLE | |
| ADAT | BODY WIDTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 25000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| FEAT | SPECIAL FEATURES | TAP LOCATION PORM 0.025 INCHES |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.000 |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | INCHES NOMINAL 2.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.750 |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | INCHES NOMINAL 2.5 |