NSN 5990-00-945-1591 · NIIN 009451591 · FSC 5990
NO DASHES 5990009451591
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 500.00 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 75.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.05 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 620.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 16.000 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 125.00 |
| AKAN | SHAFT THREAD CLASS | ZA |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.3120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4700 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 6 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1250.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1020.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7980 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 3.5 |