NSN 5306-00-288-2476 · NIIN 002882476 · FSC 5306
NO DASHES 5306002882476
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.628 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.772 AND INCHES MAXIMUM 2.802 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.518 AND INCHES MAXIMUM 2.558 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.887 AND INCHES MAXIMUM 0.937 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |