NSN 5306-01-447-3281 · NIIN 014473281 · FSC 5306
NO DASHES 5306014473281
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.453 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.813 AND INCHES MAXIMUM 1.843 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.234 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4358 AND INCHES MAXIMUM 0.4367 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | GRIP CHROMIUM |
| SFTT | SURFACE TREATMENT | BEARING SURFACE OF HEAD CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BEARING SURFACE OF HEAD FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320, TYE 2, CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GRIP FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320, TYE 2, CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC ALL TREATMENT RESPONSES QQ--416, TYE 2, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |