NSN 3020-00-675-1761 · NIIN 006751761 · FSC 3020
NO DASHES 3020006751761
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.345 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 2.625 |
| FEAT | SPECIAL FEATURES | 1ST END COUNTERBORE,2.364 IN. DIA BY 0.438 IN. DP |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.050 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 3.3349 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.416 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 45 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.0156 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 64.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.213 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.2500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| AJLA | TEETH QUANTITY | 40 |
| STYL | STYLE DESIGNATOR |