NSN 6105-00-241-5156 · NIIN 002415156 · FSC 6105
NO DASHES 6105002415156
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 5.062 |
| AAJU | OVERALL LENGTH | INCHES 7.906 |
| AAJV | OVERALL WIDTH | INCHES 6.000 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.1880 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.3752 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.375 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | ADJUSTABLE BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.875 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.625 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.688 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 AND OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1600.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.680 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A13 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---2511 |