NSN 3130-01-169-9444 · NIIN 011699444 · FSC 3130
NO DASHES 3130011699444
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.9375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.6875 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 5.2500 AND INCHES MAXIMUM 6.1250 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.3750 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 3.2500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.5000 |
| AGKL | LUBRICATION FITTING TYPE | CUP |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.0000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 3.2500 |
| AMCL | BLOCK TYPE | FLOATING |
| ANJS | SHAFT END TYPE | CLOSED OR OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.7500 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 30.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | STEEL ADAPTER |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | BEARING STEEL |
| STYL | STYLE DESIGNATOR |