NSN 5305-01-358-4865 · NIIN 013584865 · FSC 5305
NO DASHES 5305013584865
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.705 AND INCHES MAXIMUM 2.735 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.583 AND INCHES MAXIMUM 0.635 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | TITANIUM ALLOY UNS R56400 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 32.0 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |