NSN 5962-00-112-2466 · NIIN 001122466 · FSC 5962
NO DASHES 5962001122466
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.275 |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 8.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 50.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 50.00 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | DIODE-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 3 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | MULTIVIBRATOR, MONOSTABLE 1 |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.260 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.070 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 96214-507882 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 14 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | MONOLITHIC AND BURN IN AND NEGATIVE EDGE TRIGGERED AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |