NSN 3020-00-203-1450 · NIIN 002031450 · FSC 3020
NO DASHES 3020002031450
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 80.0 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 90.0 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH BODY FIRST END INCHES 0.138 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END PLAIN 2 AND THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.069 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH BODY FIRST END UNIFIED NATIONAL COARSE (UNC) |
| AJLA | TEETH QUANTITY | 64 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.1980 AND INCHES MAXIMUM 2.0000 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STYL | STYLE DESIGNATOR | |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 1.750 |
| MATT | MATERIAL | OVERALL STEEL COMP 1010 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 0.125 |
| CWTB | COUNTERBORE NOMINAL DEPTH | COUNTERBORE FIRST END INCHES 0.094 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | COUNTERBORE FIRST END INCHES 1.531 |
| CWRS | BORE NOMINAL DIAMETER | COUNTERBORE FIRST END INCHES 0.688 |