NSN 3020-00-231-2300 · NIIN 002312300 · FSC 3020
NO DASHES 3020002312300
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.469 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.374 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.625 |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-671,CL 3 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.440 |
| AJLA | TEETH QUANTITY | 120 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.065 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.094 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.240 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.7500 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.812 |
| ANTP | BORE STYLE |
Supersedes
This item replaces cancelled NIIN 000310184. An older drawing citing one of those numbers resolves here.