NSN 2540-00-628-0975 · NIIN 006280975 · FSC 2540
NO DASHES 2540006280975
In Stock
SHAFT AND PIVOT ASSEMBLY
Vehicular Furniture and Accessories
Application: XM987 AND M993
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | SHAFT 0.625 IN. DIA,BUTADIENE FIBER WASHER 62138,STEEL WASHER 62139,NUT 60705,RUBBER CAP 75675,KNURLED DRIVER 72 TEETH 80017,NUT CAP 60825,LOCKWASHER 62154,2 MTG HOLES 0.196 IN. DIA,C TO C DISTANCE BETWEEN MTG HOLES 1.250 IN.,1.000 IN. MAJOR LG |
| AGAV | END ITEM IDENTIFICATION | XM987 AND M993 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT AND PIVOT, WINDSHIELD WIPER |
| SUPP | SUPPLEMENTARY FEATURES | ALL MATERIALS SHALL BE OF A CORROSION RESISTING TYPE OR SUITABLY PROTECTED TO ENDURE A 72 HOUR MINIMUM SALT SPRAY TEST PER ASTM B117; VISIBLE CORROSION IS ACCEPTABLE AS LONG AS PIVOT ASSEMBLY REMAINS FULLY FUNCTIONAL; PIVOT ASSEMBLY MUST ROTATE WHEN INITIALLY SUBJECTED TO A 15"/LBS MAXIMUM TORQUE AFTER INITIAL ROTATION; IT MUST ROTATE WITH A MAXIMUM OF 8"/LBS TORQUE |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906-DOD-STD-100 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80204-ANSI Y14.5-1973 |
| FEAT | SPECIAL FEATURES | PERFORMANCE REQUIREMENTS: PIVOT ASSEMBLY MUST FUNCTION PROPERLY WITHIN -25 DEGREES FAHRENHEIT TO +125 DEGREES FAHRENHEIT TEMPERATURE RANGE AND WITHSTAND STORAGE AT -60 DEGREES FAHRENHEIT WITHOUT DAMAGE OR DETERIORATION |
Supersedes
This item replaces cancelled NIIN 011599779. An older drawing citing one of those numbers resolves here.