NSN 5990-00-504-8279 · NIIN 005048279 · FSC 5990
NO DASHES 5990005048279
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHCG | MAXIMUM TEMP RISE | CELSIUS 50.0 |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES MINIMUM 1.8070 AND INCHES MAXIMUM 1.8170 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 1.2450 AND INCHES MAXIMUM 1.2550 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2498 AND INCHES MAXIMUM 0.2500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7600 AND INCHES MAXIMUM 0.7800 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 3.3750 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.6300 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.3600 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.6230 AND INCHES MAXIMUM 3.6250 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-2335 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-2335 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1770 AND INCHES MAXIMUM 0.1970 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| FEAT | SPECIAL FEATURES | ROUND,THREADED SHAFT WITH SLOT; SLOT DEPTH 0.050 INCH; SLOT WIDTH 0.030 INCH |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| CQTM | TERMINAL LOCATION | REAR |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.400 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSL | BODY SIZE | 5 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 600.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 7.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1750 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0081 |
Supersedes
This item replaces cancelled NIINs 006364106 · 009487757. An older drawing citing one of those numbers resolves here.