NSN 5962-01-088-7116 · NIIN 010887116 · FSC 5962
NO DASHES 5962010887116
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.370 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.165 AND INCHES MAXIMUM 0.185 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 85.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 175.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND INTERNALLY COMPENSATED |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 4 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | AMPLIFIER, VIDEO 1 |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 9.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 100.00 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACE |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 12436-6010472 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 10 |
Supersedes
This item replaces cancelled NIIN 013114515. An older drawing citing one of those numbers resolves here.