NSN 5306-01-201-9027 · NIIN 012019027 · FSC 5306
NO DASHES 5306012019027
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.680 AND INCHES MAXIMUM 0.730 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.565 AND INCHES MAXIMUM 3.595 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.330 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.500 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | ALL HOLES INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.865 AND INCHES MAXIMUM 2.885 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | ALL HOLES INCHES MINIMUM 3.341 AND INCHES MAXIMUM 3.361 |
| FEAT | SPECIAL FEATURES | TWO HOLES IN SHANK AT 90 DEGREE ANGLE TO ONE ANOTHER |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |