NSN 5962-01-029-2894 · NIIN 010292894 · FSC 5962
NO DASHES 5962010292894
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.439 AND INCHES MAXIMUM 1.573 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MAXIMUM 0.875 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.050 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.450 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | REGULATOR, VOLTAGE 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-3 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM POWER SOURCE -20.0 AND VOLTS MAXIMUM POWER SOURCE 20.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 28687-74E2N468 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 2 |
Supersedes
This item replaces cancelled NIIN 011172931. An older drawing citing one of those numbers resolves here.