NSN 3040-00-542-0839 · NIIN 005420839 · FSC 3040
NO DASHES 3040005420839
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZV | FSC APPLICATION DATA | RADAR SET,NONAIRBORNE,EXCEPT FIRE CONTROL AND GUIDED MISSILE |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 25.250 |
| ABSA | SPLINE QUANTITY | 12 |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 21.880 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.406 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AXFH | SPLINE LENGTH | BOTH ENDS INCHES NOMINAL 0.437 |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| CBCL | SURFACE TYPE | EXPOSED TO CLIMATIC ELEMENTS OR SHELTERED FROM CLIMATIC ELEMENTS |
| MATT | MATERIAL | CASING STEEL |
| CFRM | TORSIONAL DEFLECTION RATING | 6 DEG FT LB IN. TORSIONAL DEFLECTION RATING FOR WINDING AND UNWINDING |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AAUJ | SPLINE MAJOR DIAMETER | BOTH ENDS INCHES NOMINAL 0.271 |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | DIAMETER BOTH ENDS INCHES NOMINAL 0.500 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | BOTH ENDS EXTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, INTERNAL SPLINED |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| AEDN | TIP LENGTH | BOTH ENDS INCHES NOMINAL 1.750 |
| AGJR | MINOR DIAMETER | SPLINE BOTH ENDS INCHES NOMINAL 0.239 |
| AGJS | PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.250 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES NOMINAL 1.000 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 25.250 |
| FDCL | FINISH DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE RESPONSE -IL-F-14072 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 17.0 LBS.THREAD SIZE IS 3/4-16.FINISH PER SPEC NO. MIL-F-14072. |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNF |
| AASA | THREAD LENGTH | BOTH ENDS INCHES NOMINAL 0.563 |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 3.500 |