NSN 5340-00-594-4106 · NIIN 005944106 · FSC 5340
NO DASHES 5340005944106
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | THREE SLITS IN FIRST LEG; HOLES ADJACENT TO SECOND LEG LG 0.087 IN. MIN 0.091 IN. MAX DIA; ADDITIONAL 0.180 IN. NOM DIA HOLE IN SECOND LEG ON 0.500 IN. CENTERLINE; ONE HOLE 0.093 DJA COUNTERSUNK TO 0.109 IN. DIA ON BOTH SIDES LOCATED ON CENTER SECTION |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.143 AND INCHES MAXIMUM 0.145 |
| AHLQ | SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.219 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.100 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.125 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.2825 AND INCHES MAXIMUM 0.4105 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.563 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.125 |
| AJZU | FIRST LEG STYLE | |
| MATT | MATERIAL | COPPER ALLOY 511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- B103 |
| STYL | STYLE DESIGNATOR | |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.000 |
| AHQB | CENTER SECTION THICKNESS | INCHES MINIMUM 0.0605 AND INCHES MAXIMUM 0.0675 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.000 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.0605 AND INCHES MAXIMUM 0.0675 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 0.718 |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.032 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.125 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.125 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.0605 AND INCHES MAXIMUM 0.0675 |