NSN 5905-00-578-0291 · NIIN 005780291 · FSC 5905
NO DASHES 5905005780291
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.10 TO 0.10 AND 2ND SECTION -0.15 TO 0.15 AND 3RD SECTION -0.10 TO 0.10 AND 4TH SECTION -0.10 TO 0.10 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.750 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -0.5 TO 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -5.0 TO 5.0 AND 2ND SECTION -1.0 TO 1.0 AND 3RD SECTION -1.0 TO 1.0 AND 4TH SECTION -1.0 TO 1.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 16 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 4 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 490.0 AND KILOHMS 2ND SECTION 29.218 AND KILOHMS 3RD SECTION 490.0 AND KILOHMS 4TH SECTION 490.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1ST SECTION 236.0 AND 2ND SECTION 221.0 AND 3RD SECTION 236.0 AND 4TH SECTION 236.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 1.250 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |