NSN 3110-01-022-3121 · NIIN 010223121 · FSC 3110
NO DASHES 3110010223121
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES MAXIMUM 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.8550 AND INCHES MAXIMUM 2.8850 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3750 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MAXIMUM 1.3400 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.0000 |
| AGVT | OUTER RING WIDTH | INCHES MAXIMUM 0.3400 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 2.1850 AND INCHES MAXIMUM 2.2150 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 8.00 |
| FEAT | SPECIAL FEATURES | CENTER LINE IS OPTIONAL BY O.0470 IN. NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4620 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |