NSN 6105-00-537-5971 · NIIN 005375971 · FSC 6105
NO DASHES 6105005375971
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.41 |
| CBBL | FEATURES PROVIDED | ELECTRIC NOISE SUPPRESSOR AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.375 |
| CWDY | TEMP RATING | OPERATING CELSIUS -40.0 AND OPERATING CELSIUS 55.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.625 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 2875.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| FAAZ | PHASE | INPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| AXGY | MOUNTING METHOD | END BELL |
| BTBY | SHAFT END STYLE | |
| AAJT | OVERALL HEIGHT | INCHES 1.875 |
| AAJU | OVERALL LENGTH | INCHES 2.390 |
| AAJV | OVERALL WIDTH | INCHES 1.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1245 |
| AJLA | TEETH QUANTITY | 9 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-DRAG CUP |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 3 |
Supersedes
This item replaces cancelled NIIN 005363367. An older drawing citing one of those numbers resolves here.