NSN 5905-00-087-7160 · NIIN 000877160 · FSC 5905
NO DASHES 5905000877160
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.220 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.087 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.030 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.030 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.500 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.500 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.220 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.081 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |