NSN 3130-01-264-6482 · NIIN 012646482 · FSC 3130
NO DASHES 3130012646482
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.2812 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.5000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 4.115 AND INCHES MAXIMUM 4.135 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 2.490 AND INCHES MAXIMUM 2.510 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 2.938 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 3.750 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 4.750 |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES MINIMUM 1.747 AND INCHES MAXIMUM 1.753 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWHN | HOUSING OPENING WIDTH | INCHES MINIMUM 0.750 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY 6061 |
| MATT | MATERIAL | BEARING STEEL |
| STYL | STYLE DESIGNATOR |